Porter Cable 892 Router Review

When you purchase a Porter-Cable product, you will receive a soft start and an accurate rack-and-pinion micro-adjuster. It is the most accurate because it is the only one with actual rpm indicated on the dial.

Even though removing the base to perform bit adjustments is a simple process, using the single-wrench method makes the process marginally more challenging. Additionally, this router experienced the most amount of bit runout.

Easy-to-use router set from Porter Cable. There is usually a maximum RPM on most items in this category. The maximum RPM specifies the upper limit of performance and safety.

The maximum RPM in this scenario is 23000. 2 1/4 horsepower is provided. A 12 amp output is provided. Carrying case, 1/4″ and 1/2″ collet wrenches, router motor, and instructions are all included in the kit.

Each case contains one kit. These items are geared toward the needs of businesses in the industrial sector.

The performance of the Porter-Cable 892 Fixed-Base Router Kit is robust, smooth, and trustworthy, and it ranges from 10,000 to 23,000 revolutions per minute (rpm).

Unlocking the foundation and utilizing this straightforward instrument are the only two steps required to modify the depth of the cut.

PORTER CABLE 892 ROUTER REVIEW

 

Porter Cable 892 Router Review

The performance of the Porter-Cable 892 Fixed-Base Router Kit is robust, smooth, and trustworthy, and it ranges from 10,000 to 23,000 revolutions per minute (rpm).

Unlocking the foundation and utilizing this straightforward instrument are the only two steps required to modify the depth of the cut.

The 892 is a high-performance device with a slew of convenient features to increase user efficiency. You can turn off the router’s power using a dual-position switch while keeping both hands on the rubber-coated handles.

In and Out of the Table, Powerful, Quiet Performance.

Regarding cutting molding and hardwoods with speed and efficiency, the 892 has a powerful 12-amp, 2-1/4 horsepower engine with full-time electronic feedback for steady speed under load.

With its easy-to-switch bases, the motor offers maximum adaptability.

Over-the-Table Modifications Save Time and Effort.

The 892’s ability to make above-the-table adjustments saves time and effort. It takes a few seconds to release the motor, adjust the bit height, lock the spindle, and secure the motor from above the router table. Hex sockets are all that’s needed.

Adaptive Design Elements for Easier Changes and Modifications

The 892 is a high-performance device with a slew of convenient features to increase user efficiency. You can turn off the router’s power using a dual-position switch while keeping both hands on the rubber-coated handles. 

A spindle-lock feature makes collet loosening with a single wrench simple for bit changes as well. With a sturdy cam lever, coarse depth adjustment and motor release may be accomplished in a flash.

Specs and Warranty Details

A just 9 pounds Corded-electric and a height of 12.81 inches; the 892 may be easily handled and held. The collet wrench, 1/4- and 1/2-inch collets, and a carrying case are all included for convenience.

If unsatisfied, you can return it for a full refund within 30 days of purchase.

What’s Included in the Package,

They were carrying cases with an instruction manual for router motor, fixed base, 1/4-inch, and 1/2-inch collets.

Power Source: Corded-electric
Voltage: 120 VOLTS
Horse Power: 12 Ampere
Dimensions: 12.13 x 7.38 x 11.5 inches
Item Weight: 12.53 pounds

Key Features
  • Electronic feedback keeps the 12 Amp motor running at its optimum speed even in the most demanding tasks.
  • Bit speed can be adjusted for different applications thanks to the variable-speed control feature (10,000 – 23,000 rpm).
  • The router’s dual-position switch allows the user to reduce power while still controlling the router.
  • Comfortable over-molded grips for long-term use
  • Single-wrench bit adjustments can be made thanks to the spindle lock mechanism.
  • Quick and easy coarse depth changes and the release of the motor are made possible thanks to a durable latch lever.
  • To a precision of 1/128th of an inch, the rack and pinion adjustment system allows”
  • There are two sets of collets for 1/4″ and 1/2″ shank bits.
  • GripVacTM base, plunge base, and standard spiral down bases are all options for the motor. All three bases are supplied (690 series)
PROS
 
  • Less noisy
  • Reliable
  • Micro-adjust
  • adjustable speed setting
CONS
 
  • it relies on a push button lever to control the height of the cutting head
Conclusion:

With the Porter-Cable, you get a soft start and an accurate rack-and-pinion micro-adjuster. As the only one with real rpm listed on the dial, it’s the most accurate. Even though removing the base for bit adjustments is easy, using the single-wrench technique makes them a bit more difficult. This router also has the most bit runout.